Sunwave-tech REMOTECOMM SRC-7000 Manual de usuario descargar pdf (Pagina 59)

Troubleshooting

Appendix

Troubleshooting

Problem Possible solution

Touch screen does not

display anything when

touched.

*Check the batteries are installed correctly.

*The batteries may be discharged. Replace

the batteries.

The SRC-7000 cannot

operate a device after

learning a function.

*Check the SRC-7000 has learned the function

correctly. Delete the code and teach the SRC-

7000 again.

*Check you used the correct remote to teach

the SRC-7000.

*The SRC-7000 cannot learn all codes. You

may not be able to program the SRC-7000 for

some devices or functions.

Cannot transmit between

two SRC-7000s (using the

optional SLC-2080 cable).

*Check the batteries in both remotes.

*Make sure the cable is connected properly.

Learning does not work. *The batteries may be discharged. Replace

the batteries.

*Check the remote is correctly aimed at the

SRC-7000’s learning eye.

*Check the remote’s IR transmitter is 5 ~ 10 cm

from the SRC-7000’s learning eye while

learning.

*Check you are holding the remote’s button

until the function is learned.

*Do not teach the SRC-7000 near

incandescent lights.

*Check the SRC-7000 has learned the function

correctly.

*The SRC-7000 cannot learn all codes. You

may not be able to program the SRC-7000 for

some devices or functions.

1 2 ... 54 55 56 57 58 59 60

Sin comentarios

Sunwave-tech REMOTECOMM SRC-7000 Manual de usuario Pagina 59